Showing posts with label Teacher Appreciation. Show all posts
Showing posts with label Teacher Appreciation. Show all posts

Monday, April 6, 2015

Teacher Note Necklace Made from Upcycled CD

Every year I like to make a little something for my Granddaughter's Teacher for Teacher appreciation week and this year I've come up with this note necklace that is made from an old CD.

Teacher Note Necklace made from Upcycled CD-ROM

I wanted to incorporate something useful into something fun!

I noticed that the teachers at school sometime have recess or yard duty and I thought it might be handy to have this little necklace with a post-it note pad and pen attached!


I even included a badge clip so that they can easily wear their school badge with the necklace.


To personalize it for a teacher gift, I added the photo of my Granddaughter and a sweet quote/poem about teachers!


This craft can easily be done in 15 minutes (minus drying time), though I'll have to admit, I added a few more things to my version that probably made it take a little longer.

Adding the gold cord around the photo was a bit tedious as it didn't want to easily lay down in a circle.
Also, the way I attached the beaded necklace to the cd was more elaborate than you really need to get.

I was just thinking of how it might lay nicer, so I added the snipped paper clip ends and cut the necklace in half and glued it to the ends of the clips.

This of course took more time than just gluing the whole beaded necklace to the back of the CD, but I wanted to add the square post-it note which took up more room and made it harder to mount the beads directly to the back of the cd.

I started by sanding the CD lightly on the shiny side and a little harder on the colored side because I was using tissue paper to cover it and didn't want any of the writing to show through.

I cut some strips of patterned tissue paper and then cut them into oblong pieces and adhered them to the CD with Mod Podge.

I only put two coats of Mod Podge, but you can add more if you like, just be sure to allow drying time between coats.

I scanned and printed out a photo of my Granddaughter on my Epson CX7400 color printer and glued it to the center of the CD.

(Note: before applying Mod Podge to a ink jet photo print out...apply a light coat of fixative to the photo/print out first...it will prevent the Mod Podge from causing the print to run or bleed!)

I was going to make a print out of the poem on my computer, but for times sake I decided to hand write the quote using a black sharpie marker.

In hindsight...I wish I had gone with the printout, only because I have a terrible time lining up my writing/printing as you can tell from the pictures!

I even used a "template" I made from paper and pencil, hoping to get it right and I still wasn't thrilled with the results, but the message will get across I suppose and maybe it will make the gift more personable!

The note pad/post-it note was attached using double sided foam tape and the pen was attached using the clip on the pen.

I thought of using magnets for the pen, but I didn't want to add any more weight than necessary to the necklace.

This project was quick and very inexpensive to make, I found the beads, tissue paper, pen and post-it notes at the 99 cents store and of course the CD was just an old one I had laying around that I no longer needed.



Here are the tools and supplies I used for this project:


Tools & Materials List:

Old CD (Not shown in photo above)
Sand Paper
Tissue Paper
Beaded Necklace, Plastic
Post-it Notes
Mod Podge
E6000 Adhesive
Workable Fixatif
Aleene's Tacky Glue
Mod Podge Gloss Sealer
Foam Paint Brush
Wire Cutters
Foam Mounting Tape (Two Sided)
Heavy Duty Scissors (Cutco Brand)
Regular Scissors
Sharpie Pen, Black
Pen (with clip)
Pencil
Gold Cord
Cardboard
Wax Paper and/or Butcher Paper
Paper Weights
Color Printer, Ink Jet (Epson)
Paper Clips
Plastic Container (for Mod Podge) (Not shown in photo above)

I made a slideshow showing the steps I took to make this project.

You can view it here on my YouTube Channel:


Or here on my Flipagram Feed:



Thanks so much for visiting my blog!

If you want to see some more great Teacher Appreciation Gift Ideas, click on the graphic below and visit Angie, Carolina and Jessica's blogs for some awesome and crafty inspiration!




This project/post is linked to the following sites/link-up parties:

Skip To My Lou




Friday, March 21, 2014

Desk Organizer for Teacher

I am really loving the Craft Lightning  Series sponsored by my favorite bloggers, Angie at Country Chic Cottage and Carolina at 30 minute crafts and this current version, Teacher Appreciation, is no exception!


I am always trying to do 10 things at once and am never very successful in getting things done, so finding a craft I can do in 15 minutes or less fits right in with my daily madness!

As my previous visitors and followers already know, I babysit two of my Grandchildren on a regular basis and one of them is in school and she LOVES to make things for her teachers, so I decided to be sure and make a teacher gift every year for her to give to her current teacher.

Last year, I made this personalized coffee container for her Kindergarten teacher and it was a hit not only with Little B and her teacher, but with the entire class!

I don't know if this project will be quite as popular as that one, but since I've been on a "recycle/upcycle" trend lately, I decided to continue with that theme and try to re-use something in a creative way.

I had seen a very cute idea on either Pinterest or Stumble Upon recently and wanted to re-create it but wasn't sure if that exact item (A jewelry holder) would fit for B's teacher, since I do not know a whole lot about her and what she might like, so I decided to down-size it and make it for use on a teacher's desk.

(Click Here to see the original project that I used for inspiration)

So, I made this desk organizer (paper clip, brad, rubber-band holder).


I tried to think of what little items a teacher would use that would need to be organized for quick use on her desk and I came up with paper clips, rubber bands, brads and push-pins.
(I forgot to take any photos of the organizer with push-pins in it...oops! But you get the idea!)

I used 3 empty plastic soda bottles (12-20 oz.) for this organizer, but you could make yours bigger and/or smaller depending on your taste and what bottles you have on hand.

One of the great things about this project is you can almost make it from stuff just around your house and in your craft stash, especially if you have a hubby with a garage or shop!


Oddly enough, my husband has a garage stock full of hardware and tools, but since he wasn't home at the time I started my project, I couldn't find some of the hardware I needed, so I did run to the corner hardware store real quick and pick-up the threaded rod, washers and nuts, though I'm pretty sure he had most of that hidden somewhere in the dark corners of his man cave!

When he got home, I had him do the drilling for me, even though I attempted it with my 25+ year old dremel too, but it finally gave up the ghost, just as I was drilling my first hole, so I had him finish the others for me, as I was not sure I wouldn't drill my finger trying to wrestle with the bigger drill!

(Note: Be sure to wear safety gear, ie: googles and leather gloves when drilling or cutting...I forgot the gloves in my pics, but I did wear safety glasses!)

I noticed that most plastic bottles have a built-in line around them right about where you want to cut, but if you prefer a deeper dish/bowl, then just mark the bottle with tape and then cut it with the utility knife.

I sanded the edges of the plastic after I cut just to smooth them out a bit.
I decided to add some washi tape to the edges also, mostly for color and decoration, but this is not necessary if you sand them smooth or unless you just want to dress them up a bit!

(NOTE about the washi tape...some brands/types don't want to stick as well on plastic...especially when you are wrapping it around contours and curves! In this case, you may need to use a little elmers glue or mod podge to seal the edges. I did not do this...as you might be able to see in a few of the pics...but I will probably go back and do this before I have little B give this to her teacher.)

After attaching all the pieces using the washers and nuts I decided to add an embellishment to the top, to make it look a little prettier!

I used a plain white bead and inserted a straight pin with a colored ball tip and glued them together with E6000.

When it dried, I just snipped off the excess pin and glued the embelli to the top of the threaded rod.

This project was so easy and inexpensive...and it turned out pretty cute for a recycled project!





Hope you like it and might want to try making one of your own or for your favorite teacher!


Here is a photo of the tools and supplies used for this project:


Supplies/Tools List:

3 Empty Plastic Soda Bottles (12 oz., 16.9 oz. & 20 oz.)
Painters Tape, Blue, Scotch 3M
Utility Knife, Husky
Threaded Rod, 1/4" (approx. 6")
Hex Nuts, 1/4"
Flat Washers, 3/16"
Scotch Expressions Tape, 3/4", Dark Pink (Fuschia), Matte Finish
Washi Tape, We-R-Memory Keepers, 1 cm., Green/White design
Washi Tape, We-R-Memory Keepers, 1 cm., Blue flower design
Sand Paper, Med-Fine Grit
Adhesive, Industrial Strength, E6000
Side Cutter/Wire Cutter - (Not shown - Used to trim off excess straight pin)

I would like to send out a special thank-you to my daughter Beth, (who is a photographer) for helping me with some of the photos (you will be able to tell which one's are hers! She's a pro...I am NOT! LOL!)
If you get a chance, check out her photography site, she is very talented and I'm so proud of her!

Also, a big thank-you to Angie and Carolina for once again allowing me to be part of this awesome blog series.


It's always so much fun and so much inspiration to be shared!

Be sure to check out all the great Teacher Appreciation projects in this Craft Lightning Series.
Angie and Carolina will be posting round-ups of all the projects each day!

Thanks for stopping by my blog!








This project is linked-up to the following sites/link parties:


2 Crochet Hooks

Friday, July 12, 2013

Upcycled/Recycled Gift for Teacher Appreciation

I have been volunteering in my Granddaughter "B's" class this year and when it came time for teacher appreciation week I knew I wanted to do something for B's teacher.


I've really loved being in her class and watching how she interacts with the children and helps them learn and grow.

She is just plain amazing in my book!

I really thought it was awesome how she dressed like a Dalmatian on the 101 st day of school!

The kids REALLY loved that!


I asked "B" what kind of things did her teacher like and she told me "Coffee, Monkey's and US!" (meaning the whole kindergarten class.) That really made me smile!

I decided to go with the coffee theme for a gift since I already had something in mind that would fit perfectly with coffee.

A few months earlier I had made some Green Bean Casserole and was pleasantly surprised to find that French's had a new container for their French Fried Onions.


When I saw it, I immediately started thinking of all the cool things I could make with it later on.

I have a bit of a confession to make here...I am a recycle junkie!

(And I don't mean the environmental kind who loves to "turn in" all her recycles to the local county recycle program...) I keep all kinds of "crap" as DH would call it because I am CERTAIN something can be made from it later! LOL!

The problem is...most of the time...LATER never comes and I am over-run with all kinds of glass, plastic and cardboard containers.

(Yes...I would be a perfect candidate for that reality show "Hoarder's"...
My husband is constantly reminding me of this. He isn't amused!)

I had saved a couple of those cool containers and thought one of them would be PERFECT for this project.

I loved the way the lid snapped on securely and knew it would work good for coffee.

The smooth plastic surface would be easy to cover with fabric or scrapbooking paper.

I decided to go with fabric because I thought it would hold up better with repeated use.


I bought some little coffee packets at the dollar store to store inside the container, knowing that B's teacher would probably want to eventually replace it with her own brand/taste in coffee when it needed to be refilled.


I had some jewelry findings that I had purchased at an Estate Sale and found the perfect embellishment to add to the container along with some coordinating ribbon.


I added black felt to the top of the lid and to the bottom of the container using a pattern I made from tracing the lid and bottom.

You can do this yourself or I created a PDF version of my pattern that you can download here for free to save you some time.

I wanted to personalize the container a little more, so that it would somehow hold a memory for the teacher of my sweet Granddaughter, so I took her kindergarten school picture and cut it to fit in a round frame (old earring from the jewelry findings) and attached it to the outside lid of the box.


I also wanted to let Mrs. R know how special she was to me and B and what a good teacher she is, so I included a quote about teaching on the inside of the lid, so she would see it whenever she opened the container.

I found this cute graphic/quote at a great website called Bitsy Creations. They have some really cute designs and many of them are offered as free printables.

If you'd like to download this particular graphic/quote please go here for the link.


As a final touch I purchased a small coffee themed kitchen towel and a gift card to Starbucks for when Ms. R wanted coffee on the go!


Little B was pretty excited when I told her that I had made something special for her teacher and she couldn't wait to give it to her!


Supplies and Tools used for this project:


Supplies/Tools List:

Re-useable/Re-sealable Plastic Container
Fabric Strip - 14" x 14" (approx.)
Black Felt - 5"x3" (approx.) (2 pieces)
Pattern for Felt Pieces - 2 pcs. (Traced from top and bottom of container onto paper) Download Here.
Glue Dots - Glue Lines, 1"
Ribbon, Sheer Organdy, Black, 7/8" (Ribbon Trends)
Ribbon, Grosgrain, Black, 1/4" (Essentials)
Aleene's Tacky Glue
E6000 Glue
Jewelry Findings/Embellishments - (Not shown in photo above) I used an old round earring and a cabochon
Scissors
Jewelry Pliers
Popsicle Stick (for use spreading glue)
Straight Pins (to pin pattern to felt pieces)
Printed Quote/Poem for Inside of Lid - (The one shown above can be downloaded here)
Gift Card
Small food/candy items to fill container (in this case coffee packets)


Thanks for stopping by!

This post/project is linked-up to the following sites/link parties: