Spider Web Door Hanger For Halloween

It's hard to believe that Fall is fast approaching and that Halloween is "creeping" up on us!

Of course what would the Holiday be without a little "Craft Lightning"??!!

This awesome series has been hosted for a few years now by Angie at Country Chic Cottage and Carolina from 30 minute Crafts and it is always so much fun!

This edition is highlighting Halloween and is co-hosted by: Jen Goode from the blog "100 Directions".

I have been collecting bottle caps for awhile, just imagining all the crafty possibilities they hold...so I decided it was time to try and use some of them up before Hubby asks that inevitable question..."What are you going to do with those?" 

At first I wanted to make a Halloween-themed wind chime, but soon discovered that in order to make these babies "chime" I would need a ton of them and couldn't possibly get it done in 15 minutes or less, so I moved on to a simpler solution: a Door Hanger!

The most obvious thing I could think of that resembled the shape of the bottle caps was of course a pumpkin or a spider and I settled on spiders and a spider web!

This project was so easy to make and really the only time consuming part was taking the rubber seals out of the bottle caps. For this reason, I recommend you purchase the regular metal bottle caps that are made specifically for crafts, that don't include that seal.

If you aren't in a hurry though and you don't mind the tedious task of removing them, then by all means go ahead and recycle/upcycle!

Here is a short slideshow/video I made of how I assembled this project:

Here are the tools & supplies I used to make this project:

Supplies/Tools List:

(*Disclosure: Some text may contain affiliate links) 

Wire Clothes Hanger

Pop Bottle Caps
Cricut Cuttle Bug Embosser (To Flatten Caps)
Black Spray Paint (Krylon)
Wood Block and Nail (To punch holes in bottle caps)
Hammer
Hot Glue Gun (AdTech Dual-Temp)
Glue Sticks (AdTech Multi-Temp)
Ruler
Lace, Black (Remnant from stash...brand unknown)
Lace Trim, Black (Remant from stash...brand unknown)
Scissors
Paint Pen, Silver (Marvy/Uchida DecoColor)
Decorative Bead Trim, Plastic, Silver (Hobby Lobby)
Needle Nose Pliers
Nylon MonoFilament (aka:Fishing Line)
Metal Scribe and/or wooden popsicle sticks

Be sure to check-out all of the other Halloween Goodies in this series by clicking on the info-graphic below!

Thank-you for visiting my blog today, hope you found some fun and inspiration and will visit again soon!



(*Stuff-n-Such, Lisa Hall, is a participant in the Amazon Services LLC Associates Program, and affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com)

Christmas Cinnamon Stick Car Air Freshener/Ornament

The Holiday's are here and I have to say...it wouldn't be complete without the inspirational and fun "Craft Lightning" series hosted every year by Angie at Country Chic Cottage and Carolina at 30 minute Crafts!

For those few of you who may not have heard of it...Craft Lighting is a round-up of Crafts that take 15 minutes or less to make (minus drying time).

This year, for the Holiday edition Aunt Peaches joins in as a co-host with Angie and Carolina!

It gets a little tougher every year to come up with something "new" to make that hasn't been seen before...and I'm sure my project is not really new, but I have a hankering for recycle/upcycle projects using stuff I have collected (hoarded) over the years!

So I decided to make this scented Car Freshener Ornament:

I was trying to think of something different than just an everyday ornament and for some reason my car popped into my head as it's fairly new... yet has lost that "new car smell" that we all cherish so much!

So I thought how cool would that be to make a cute air freshener that could double as a Christmas Ornament!

There are other little touches you could add to this ornament to make it even better, but as I was trying to keep it at the 15 minute time frame, I didn't get too lavish!

One thing I thought of...was maybe adding a little pocket/pouch to the back of the ornament containing pot pourri or sachet scents as they are a bit stronger than just the cinnamon sticks alone.

You can also boil the cinnamon sticks to bring out more of the scent if they are older and have been sitting around awhile (like mine had been!).

When the sticks lose their scent, you can either add the sachet or a spray to it, or just use it as a pretty Christmas Ornament for your Holiday Tree!

Here is a video showing the steps taken on this project:

Here are the tools and supplies I used to make this project:

Supplies/Tools Used:

Mason Jar Lid (inside piece only)

Cinnamon Sticks, Holiday Time (Marketed By Walmart)

Small Beads, Wooden, 3 ea. (from excess stash on hand, brand unknown)

Drill, Black & Decker

Drill Bit, 1/8"

Hammer, Small, Ball Peen

Scissors

Scribe/Awl

Small Nail (for punching pilot hole for drilling)

Long Needle, (w/large eye for threading ribbon)

Toothpick (for applying glue to knots)

Ruler

Fabric Scrap (Mfr.Unknown, from Stash on-hand)

Felt, Red, Sparkle, Hobby Lobby

Embellishment, Holly Leaves, Plastic

Gold Cord

Ribbon, Dk. Red, Offray, 1/8"

Gold Leaf Pen, Krylon

Dress Marking Pencil, Lt. Blue

Sharpie Marker

Aleene's Tacky Glue

E6000 Glue

Mod Podge

Hope you enjoyed my post and be sure to visit Angie, Carolina and Aunt Peaches for more awesome Holiday Projects you can make in 15 minutes or less!

(Just click on the graphic below!)

Thanks for stopping by!

Halloween Pumpkin Centerpiece

Halloween is almost upon us and I have been so busy with all of my sewing projects that I almost forgot about my Craft Lightning Project!

I wanted to make something fun to dress up my plain old boring dinner table, so I decided on this Pumpkin Centerpiece made from a faux carvable pumpkin from the Dollar Store.

This cute project can be completed in 15 minutes or less if you are in a hurry!

When I started out...I took out a ton of my craft stuff just to get some inspiration and ideas...

You can see my MESS here...

I tried different combos to get an idea of what I wanted...like adding faux leaves,spanish moss and ribbon to the pumpkin, but after a lot of experimentation, I settled on ric-rac, lace and bead trim to give the pumpkin a bit of a Steampunk look.

Here is a quick photo collage view of the steps I took to make this project:

Here are the supplies/tools I used for this project:

List of Supplies/Tools used:

Faux Pumpkin, Carvable (from Dollar Store)
Old Candlestick (from Yardsale)
Craft Mat, Inkssentials, Ranger Ink
Black Braid Ric-Rac Trim, (Decorative Trim Brand sold at Hobby Lobby)
Orange & Black Ribbon, Polyester and Wire
Black and Gold Lace, 3-1/2" wide, (Unknown Brand, from craft stash)
Thread, White, 100% Polyester, Excell Brand
Sewing Needle
Scissors, Wescott Brand, Craft Scissors (from WalMart)
E6000 Glue
Ad Tech Glue Gun, 2-Temp, Cordless
Glue Sticks, Ad Tech, Multi-Temp
Beads, Gold, (small...exact size and brand unknown, from craft stash)

I am always happy to participate in the Craft Lightning Series of Quick Crafts hosted by Angie at The Country Chic Cottage and Carolina at 30 Minute Crafts!

Be sure to check out their blogs to see more fun, creative and super fast Halloween Ideas!

Thanks so much for stopping by and checking out my Halloween Centerpiece!

As always, I love hearing from you, so leave a comment if you'd like or come visit me on social media (see links in my blog sidebar).